Management and monitoring support for the new AWS region in Sydney, along with migration of AMIs, scheduling and more.
Windows AMI migration for Sydney on the way :)
Autoscaling in Amazon Virtual Private Cloud
Ylastic can now configure autoscaling for VPCs. You can use all of the scaling goodies such as policies, scheduling actions, recurring actions, etc for your instances running inside a VPC.
- Create a launch configuration that uses the security groups of your choice in your VPC.
- Create an autoscaling group with the above launch configuration and specify the VPC subnet to use.
- Kick back and watch auto scaling take over :-)
View all the changes being made to your VPC autoscaling group in its audit trail.
Change the scaling group to use a different subnet in your VPC?
Switch over to the VPCs page if you like and view all the instances (both normal and auto-scaled) that are currently inside your VPC along with their CPU util and all the other cloudwatch metric charts.
Manage your AWS cloud, the easy way :-)
Route53 Latency based routing
AWS recently enhanced Route53 with the ability to do latency based routing, which serves user requests from the EC2 region for which network latency is lowest. You create a latency resource record, and when Route53 receives a query for the domain, it will select the resource record for the EC2 region that will have the lowest latency for the requesting user. It really is as simple as that. Ylastic now supports managing these latency records. In the example below, we have a load balancer in US East(Virginia) region and one in the US West (California) region.
You can create a latency record for all seven AWS regions if you like from one screen. How does AWS figure out the latencies in order to make the routing decisions? AWS apparently gathers these latency measurements between most /24 subnets on the internet and the different AWS regions in order to create the dataset that is the basis of latency-based routing. The technology underpinning this is also used by CloudFront, the AWS CDN product.
You can also use IP addresses/Elastic IPs instead of ELBs for creating these records. This is a really nice addition to Route53, and much requested by the users. Enjoy :-)
Scheduling the AWS Account Advisor
You can now schedule the AWS Account advisor in Ylastic to run on a time period of your choice. So you can set it up to run checks against your account, say once a week and alert you via email if any flags are raised by the check. How easy is it to setup?
You will get an email if there are any warnings from the advisor run.
Simplify your AWS cloud management!
Simple Backups for EBS Instances
At Ylastic, we have been looking at backup management and ways to make it easier and simpler to both create the backups, as well as manage them easily without getting lost in looking through tons of AMIs. Introducing simplified EBS instance backup management - Select an instance, view all of its backups, launch new instances from any of the backups, and even schedule backups to happen on a time period of your choice.
Backups can be created in two different ways - on-demand, by clicking a button and filling out a few fields.
You can automate backups by setting up a scheduled task to create them on a time schedule that you want. Automate backups for multiple instances with a single task by specifyng a string to match in the name tag for instances. Ylastic will also save you storage costs by ensuring that only the specified number of latest backups are kept, and prune the older backups. The task shown below will backup all EBS instances in Virginia whose name contains Lorax at 1:00 AM everyday, and keep only the latest ten backups.
Ebs instance backup management is a feature available in the Ylastic Plus version. AWS cloud management made easier :-)
Simplifying CloudFormation Stack Management
Ylastic just released several enhancements for CloudFormation stack management. Our initial implementation of the UI was done when CloudFormation was first released, and it is now a rather large and complex service that enables you to reference and use resources from a lot of different services in the AWS stable. The increase in complexity leads to a quick proliferation of the number of resources that comprise your stack, and correspondingly needs a simpler way to get your head around what is in your stack. You launch this wonderful stack that creates instances, databases, Route53 resource records, autoscaling groups and so on. How do you actually view all of these resources that are part of your stack? No, we do not want to view a rather large incomprehensible table that lists just the physical ids for resources, as it is completely worthless in terms of getting any work done. And no, we do not mean navigating to 20 different pages to view them. We mean a single place to view your resources and additional information for each resource. Here we go ..
All the resources in a stack are displayed on this page, separated by the service that they are part of. Additional and meaningful information for each resource is also presented. For example, if you are viewing the instances that comprise your stack, you can view other info for the instance such as AMI id, zones, uptime, cloudwatch data, etc.
There is also an easier way to view the JSON template definition associated with the stack. We added a nicely formatted representation of your stack template. You can even expand and collapse various sections in the template as you like.
Stacks have a cost associated with them like most resources in AWS. We like knowing the money that we are spending on AWS, and knowing the expenses that are being incurred for a stack is very, very useful. We now display the estimated costs for each stack computed for two different time periods:
- Estimated month to date cost for running the stack.
- Estimated cost to run the stack for the whole year.
Finally, another thing that we use a lot when using stacks - the ability to view cloudwatch charts for a resource. Each resource such as instance, elb, volumes, etc will display a little sparkline graph for the CPU util or similar metric for the last 20 minutes. Click on the sparkline to display detailed cloudwatch charts for the selected resource.
Manage your AWS cloud the easier way :-)
AWS Account Advisor
Introducing the Ylastic AWS Account Advisor, a tool for inspecting your AWS environment and identifying opportunities for optimizing your usage of AWS.
We built it to be very simple and intuitive to use. You pick the checks you want to include in each run of the advisor (this initial release has a total of ten checks), Ylastic runs the checks and gives you a nice list of things that it found. Each advisor run is saved, and at any time you can review past runs.
The checks are broadly divided into four categories:
- Cost Optimization - Opportunities for reducing costs by detecting unused volumes, elastic load balancers, elastic ip addresses and Route 53 zones. These checks will also display an estimated cost saving per month and per year from removing the unused resources.
- Disaster Recovery - Check your ability to recover from system wide failures by detecting volumes that are in-use but not being backed up to snapshots. The advisor will also flag volumes that have snapshots older than several days, as that may be an indication that the backups are getting stale.
- Fault Tolerance - Identifies situations that can impact your ability to recover from the failure of an EC2 availability zone, by checking if your elastic load balancers have distributed allocation of instances, as well as if you have instances distributed in more than one zone.
- Security Audit - Secure access to your resources by detecting security groups that provide public access to sensitive ports or port ranges, as well as S3 buckets that can be listed by anonymous users across the internet.
As you use AWS over time, cruft builds up, and you start having unused resources in your account that are just driving up your costs. One of the cool features of the advisor is to flag these unused resources, and give you an estimate of the savings that you can get if you get rid of them. The screenshot below is from one of our customers that helped us test the advisor. Those elastic IPs, old unused volumes and balancers add up pretty quick :-)
The advisor is a feature available in the Ylastic Plus version. Coming soon, the ability to run the advisor on a schedule, as well as enhancements and additional checks based on feedback from customers that have already been trying this out.
AWS Route53 Spending Analytics
You have all your domains nicely imported into Route53 using Ylastic. You have scheduled backups of your zones to the S3 bucket of your choice for DR using Ylastic. You do have those zones backed up, right? You can view an audit trail of all the changes/additions/updates being made to your zones in Ylastic. And now you can view the spending break-down for all of those zones in Ylastic Plus. View the spending for the current month, previous month, curent year or the last year.
Easily view the cost associated with each of the zones you are hosting in Route53. The chart also displays the total number of queries made for the displayed zones in the chosen time period.
More integrated cool tools for Route 53 in the pipeline. Manage your AWS cloud, the easy way!
Migrating Amazon Linux AMI between EC2 regions
You can now migrate Amazon Linux based AMIs between regions of your choice in Ylastic. Select your AMI, the region you want to migrate to, and that’s it.
Get an email when the migration is completed.
Launch an instance at your leisure from the new AMI and off you go.
Enjoy and happy holidays!!
EC2 Auto Scaling Management
Refreshed our auto scaling support to include all of the recent features released by AWS. Here is a quick run through of the various things that you can do with auto scaling on EC2.
Create auto scaling groups with a new easy to use wizard that also lets you set up policies and their associated alarms for scaling up/down your EC2 fleet.
View and manage all of your resources associated with the scaling groups.
Suspend scaling processes to investigate any configuration issues with your app and resume scaling processes when you are done.
Create and manage scaling policies and their associated alarms to setup the thresholds for scaling your fleet of instances.
Setup scheduled scaling actions to increase/decrease the number of instances in your fleet. You can also setup the scaling action to be recurring on a schedule of your choice.
Peruse cloud watch charts of group metrics for the scaling group of your choice.
You can still manage your auto scaling groups that are using the trigger mechanism that has been deprecated by AWS.
More goodies on the way. Enjoy :-)